Pipeline beveling machine has good beveling performance and stable cutting slope, also known as pipeline efficient beveling machine, is driven by electricity to achieve automatic pipeline chamfering processing. Mainly by milling power system, copying cutting system, differential mechanism system, hydraulic clamping system, axial movement power system, fixed bed system, protective cover system..

Pipeline beveling machine has good beveling performance and stable cutting slope, also known as pipeline efficient beveling machine, is driven by electricity to achieve automatic pipeline chamfering processing. It is mainly composed of milling power system, copying cutting system, differential mechanism system, hydraulic clamping system, axial movement power system, fixed bed system, protective cover system, hydraulic station system, electrical control system and other ten parts. So what is the working principle of the pipe beveling machine? The following Xiaobian to introduce to you.

Working principle of pipeline beveling machine:

First, the pipe is lifted to the center elevation by the electric lifting mechanism at the bottom and the hydraulic clamping mechanism at the top, and the pipe is fixed by clamping from left to right.

Pipe beveling machine

Secondly, automatic radial differential feed or axial feed is carried out on the cutter. Automatic radial differential feed drives the tool head spindle to rotate through the milling power head, and at the same time drives the differential mechanism to realize radial automatic feed of the tool rest and complete the pipe groove processing. The axial feed uses the power head or the spindle to move in the axial direction to drive the rotating tool head to the axial feed for processing. After processing, the radial position of the tool holder does not move, and the tool can realize automatic tool return after processing.

The pipe formed by automatic bevelling machine has accurate size, smooth surface without burr, and can be welded directly. It is suitable for all kinds of metal pipe processing, such as stainless steel, alloy steel, carbon steel, low temperature steel, slope U, X, Ⅴ, double V groove, the pipe welding quality requirements are very high.

The above content is the introduction of the working principle of the pipeline beveling machine. The pipeline beveling machine can cut many kinds of groove types and groove sizes. In fact, the purpose of the beveling for the pipeline is to improve the welding quality of the pipeline. Therefore, in recent years, the requirements for pipeline bevel are becoming higher and higher, and the index requirements are becoming more and more complex. Within the normal range, the narrower the groove is, the better the mechanical properties of the welded joint will be, the higher the welding efficiency will be, and the difficulty of operation will increase accordingly.