A pressure plug is a pipe stabilization measure used to maintain pressure in the pipe and stop fluid leakage while the pipe is being serviced or valves are being replaced. When installing a pressure plug, it is necessary to pay attention to some small tips to ensure stable and efficient construction.

Step: Select the appropriate plugging equipment

When selecting the sealing equipment, the material, pressure, fluid type and working environment of the pipeline should be comprehensively considered. The commonly used sealing equipment are expansion tube plug, mechanical seal, film type sealer and so on. Different plugging equipment is suitable for different pipelines and occasions, and selecting the appropriate plugging device can greatly improve the construction efficiency and stability.

Step 2: Prepare tools and materials

Before installing a sealing device with pressure, prepare necessary tools and materials, such as belts, sealing devices, pipe cleaners, lubricating oil, wrenches, and screwdrivers. At the same time, it is also necessary to check the quality and quantity of tools and materials to ensure that no accidents occur during the construction process.

Step 3: Clean the pipes

When installing a pressure plug, the pipe needs to be cleaned. Pipe cleaners can be used to clean the inner wall of the pipe to remove sediment and impurities to ensure that the sealing equipment can be completely sealed. When cleaning the pipeline, pay attention to stability and avoid using harmful or flammable cleaning agents.

Step 4: Install the tape

Before installing the tape, it is necessary to select the appropriate rewriting tape according to the size and pressure of the pipeline. When installing the belt, it should be placed at the pipe interface, and use a wrench to gently tighten it to ensure that it is firm and stable. When installing the expansion tape, pay attention to the expansion direction and the correct rotation direction.

Step 5: Install plugging equipment

Before installing the plugging device, lubricate it for easy installation and removal. Then, place the plugging device in the tape and use a screwdriver or other tool to secure it in place. When installing the plugging device, pay attention to the installation position and direction of the plugging device to ensure its normal operation.

Step 6: Stress test

After the installation with a pressure plug is complete, a pressure test is required to ensure that the plug material can withstand the pressure in the pipeline and will not leak. Before performing a pressure test, check the installation quality of the plugging equipment and the status of the pipeline to ensure the stability and reliability of the test.

In SUMMARY:

Sealing with pressure is an important pipeline stabilization measure, and some small tips need to be paid attention to to ensure stable and efficient construction. When installing a plugging device with pressure, select appropriate plugging devices, prepare necessary tools and materials, clean pipes, install belts, install plugging devices, and perform pressure tests. Careful execution is required to ensure that the plugging material is fully sealed, maintains pressure in the pipeline, and stops fluid leakage.

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.comGet more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.comGet more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com