blanking plug machine is after the end of the pipe plugging operations under the handle of the main equipment, main effect is to pipe the plug into the pipe handle reservation position, make on the handle of the seals and sealing pipe diameter joint to achieve, truncation medium in pipe line, and special valves can be pulled down.
blanking plug machine is after the end of the pipe plugging operations under the handle of the main equipment, main effect is to pipe the plug into the pipe handle reservation position, make on the handle of the seals and sealing pipe diameter joint to achieve, truncation medium in pipe line, and special valves can be pulled down.
blanking plug machine is suitable for flammable and explosive, toxic and harmful crude oil, chemical, liquefied petroleum gas, gas, natural gas and other liquids, gas transmission pipeline and urban water supply and heating pipeline with pressure continuous transmission construction operations
Parameter | SDQ 0616 | SDQ 1436 |
Plugging rangemm | Φ150～φ400 | φ350and more |
Design PressureMpa | 4.0、10.0Optional | 10.0 |
Strokemm | 850 | 1200/1700 |
Feed mode | Manual | Manual/Hydraulic |
Feed speed | 4mm/r | 4mm/r |
Boundary dimension mm | 300×300×1250 | 700×905×1475/1950 |
Weight kg | 160Kg | 575Kg |
v scope can be used under 6 LHT0104 tapping machine plugging
When Hydraulic feed is used, optional power unit fittings are required
Plug the adapter | |||||
Specification | Specification | ||||
DN | Inch | Equipment number | DN | Inch | Equipment number |
150 | 6 | SDLX-06-P-AHT0616 | 550 | 22 | SDLX-22-P-AHT1436 |
200 | 8 | SDLX-08-P-AHT0616 | 600 | 24 | SDLX-24-P-AHT1436 |
250 | 19 | SDLX-10-P-AHT0616 | 700 | 28 | SDLX-28-P-AHT1436 |
300 | 12 | SDLX-12-P-AHT0616 | 800 | 32 | SDLX-32-P-AHT1436 |
350 | 14 | SDLX-14-P-AHT0616 | 900 | 36 | SDLX-36-P-AHT1436 |
400 | 16 | SDLX-16-P-AHT1436 | |||
450 | 18 | SDLX-18-P-AHT1436 | |||
500 | 20 | SDLX-20-P-AHT1436 | |||
v The connection Size can be customized according to user requirements
v P for adapter Pressure rating
Hydraulic drive | |
Design PressureMpa | 16 |
Driving speedmm/Min | 300 |
Rated output torque(NM) | 1850 |
Allowable instantaneous maximum torque(NM) | 3100 |
Main drive reduction ratio i | 2.4 |
Boundary dimension mm | 220×350×450 |
Weight kg | 60 |
v only adapter SDQ1436 type
上一个：Φ150～Φ2400 plugging machine
下一个：
