A sandwich type check valve is a type of valve used to prevent the backflow of fluid or gas in a pipeline. It is called a sandwich valve because it is typically installed between two flanges in a pipeline, with the valve body sandwiched between the flanges.

The sandwich type check valve consists of a valve body, a check disc, a spring, and a hinge pin. When the flow is in the correct direction, the check disc moves away from the valve seat and the fluid or gas can flow freely through the valve body and out the other side. When the flow direction reverses, the check disc is pushed against the valve seat by the spring, preventing the fluid or gas from flowing in the wrong direction. The hinge pin allows the check disc to pivot, ensuring that it can open and close smoothly.

One of the advantages of a sandwich type check valve is its versatility. It can be used in a wide range of applications, including water treatment, chemical processing, and HVAC systems. The valve can be made from a variety of materials, depending on the application, including brass, stainless steel, and plastic.

Another advantage of a sandwich type check valve is that it provides reliable and efficient backflow prevention. The valve can be designed to prevent backflow at specific pressure ranges, ensuring that the flow is always in the correct direction. The valve can also be designed to minimize pressure drop, ensuring that there is minimal loss of pressure in the system.

However, one potential disadvantage of this type of valve is that it may be more complex and expensive than other types of valves. The valve requires a check mechanism to prevent backflow, which can add complexity and cost to the valve.

Overall, the sandwich type check valve is a useful component in many pipeline systems, providing a way to prevent the backflow of fluid or gas. As with any type of valve, it is important to select the right type of valve for the specific application, and to ensure that it is properly installed and maintained to ensure reliable performance over time.

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com