A sandwich-type valve is a type of valve used in various industrial and commercial applications to control the flow of fluid or gas through a pipeline. It is called a sandwich valve because it is typically installed between two flanges in a pipeline, with the valve body sandwiched between the flanges.

The valve consists of a valve body, a valve disc, a spring, and a hinge pin. When the valve is open, the fluid or gas can flow freely through the valve body and out the other side. When the valve is closed, the valve disc is pressed against the valve seat by the spring, preventing the fluid or gas from flowing through the valve. The hinge pin allows the valve disc to pivot, ensuring that it can open and close smoothly.

One of the advantages of a sandwich-type valve is its versatility. It can be used in a wide range of applications, including water treatment, food and beverage processing, chemical processing, and HVAC systems. The valve can be made from a variety of materials, depending on the application, including brass, stainless steel, and plastic.

Another advantage of a sandwich-type valve is that it is easy to install and remove, making it ideal for applications where frequent maintenance or replacement is necessary. The valve can be installed without the need for special tools or equipment, and it can be easily removed for cleaning or repair.

However, one potential disadvantage of this type of valve is that it may not be suitable for applications where a high degree of precision is required. Because the valve disc is pressed against the valve seat by a spring, there may be some variation in the pressure required to open and close the valve. This may be problematic in applications where a precise flow rate is required.

Overall, the sandwich-type valve is a useful component in many pipeline systems, providing a simple and cost-effective way to control the flow of fluid or gas. As with any type of valve, it is important to select the right type of valve for the specific application, and to ensure that it is properly installed and maintained to ensure reliable performance over time.

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com