Blanking is an important process in manufacturing, which is to cut, cut or trim raw materials according to design requirements for subsequent processing or assembly. Pressure sealing is a common blanking method, which can maintain the shape and integrity of the raw material during the cutting process and ensure the quality of the product. The following is a detailed blanking process with pressure plugging for reference:

1. Preparation:

- Check the running status of the cutting machinery and equipment to ensure the normal operation of the equipment.

- Clean and organize the blanking work area to ensure that the work area is clean and tidy.

- Prepare the required raw materials, ensure that the quality and quantity of raw materials are in line with the wear condition of the tool, and replace the tool if necessary.

2. Set cutting parameters:

- According to product design requirements, set the cutting speed, cutting, tool feed speed and other parameters of the blanking machine.

- According to the characteristics of the raw material, set the pressure and temperature of the setting machine.

3. Installation raw materials:

- Place the raw material on the work table of the discharging machine and fix it to ensure that the raw material is stable and will not move.

4. Perform cutting operation:

- Start the cutting machine and cut according to the set parameters.

- Pay attention to observe the indicators in the cutting process, such as the running state of the tool, cutting speed and tool feed speed.

- If abnormal conditions are found in the cutting process, stop the machine in time to check and solve the problem.

5. Check the cutting result:

- Check the quality and accuracy of the cutting site after the cutting is completed.

- Use a measuring tool, such as a caliper or vernier caliper, to measure the size and flatness of the cut site to ensure that it meets the design requirements.

6. Pressure sealing treatment:

- Pressure sealing of the cutting site to prevent shape changes and damage to the raw material.

- Seal the cut area with appropriate tools, such as a pressure stopper or an extruder, and ensure that the seal is firm.

7. Clean the work area:

- After cutting, clean the work area and remove cutting waste and debris.

- Carry out routine maintenance and maintenance of the blanking machinery to keep the equipment running normally.

8. Record and summarize:

- Record key parameters and cutting results during the cutting process.

- Summarize the experience and lessons in the blanking process to provide reference for future work.

The above is a brief description of the blanking process with pressure sealing. The specific process of each plant may vary, and the specific operation needs to be adjusted according to the actual situation. Hope to help you!