Pressure plugging is a technical method of plugging or repairing in a pipe, container or equipment. It is commonly used to treat leaks or damage in pipes or containers to stop the leakage of liquids or gases. The correct procedures and stable operation must be followed when performing the expansion tape sealing to ensure the smooth progress of the work and protect the stability of the staff. The following is a detailed explanation of the proper use of the pressure plug.

Understand the system and equipment: It is essential to have a thorough understanding of the system and equipment before undertaking any plug job. This includes knowing the type, size, pressure and other parameters of the pipe or vessel, as well as understanding the properties and flow of the liquid or gas. At the same time, it is also necessary to understand the environmental conditions around the pipeline or container in order to take appropriate measures.

2. Select the appropriate sealing material: According to the characteristics and requirements of the system and equipment, select the appropriate tape and sealing material. Bands are usually made of elastic material that can rapidly expand and fill pores or cracks in a pipe or container. The sealing material should have good sealing performance and pressure resistance.

3. Preparation: Adequate preparation must be carried out before the plugging operation. First of all, it is necessary to ensure the stability of the work area and take appropriate protective measures, such as wearing personal protective equipment and setting up warning signs. Then, clean and inspect the pipe or container to make sure its surface is clean and flat and free of any impurities or damage.

4. Installation tape: Install the tape in the position that needs to be blocked or repaired. According to the need, you can select a single tape or multiple tapes for superposition. Ensure that the tape is properly installed and fits tightly to the surface of the pipe or container for optimal sealing effect.

5. Apply pressure: After installing the belt, it is necessary to apply appropriate pressure to the expansion function. Manual or automatic pressure devices can be used to achieve this purpose. Make sure the pressure is applied evenly and follow the tape manufacturer's instructions.

6. Monitoring and adjustment: Once pressure is applied, the progress of the plugging operation needs to be monitored. Check the expansion and sealing effect of the tape, and adjust it as needed. If problems or leaks are found, immediate measures should be taken to repair or re-plug.

7. Completion of the work: Once the plugging operation is completed, it is necessary to conduct a final inspection and test to ensure that the plugging effect is good. At the same time, the work area is cleaned and organized, and the waste and tools are properly disposed of.

In conclusion, pressure plugging is an effective method for pipe or container plugging and repair. Proper use of the tape and adherence to stable operating procedures are essential. Familiarize yourself with the system and equipment, select the appropriate plugging materials, make adequate preparations, and ensure the correct operation of installation and pressure application. At the same time, the progress of the plugging operation is monitored and adjusted, and the final inspection and cleanup are carried out after the work is completed. Through the correct use of pressure sealing methods, leakage and damage can be effectively prevented and the stability of the staff can be protected.

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com