Customized pressure plugging is a plugging process carried out in pipelines, containers or equipment, which is an important measure to ensure the stability and reliability of the system. In many industrial industries, this technology is widely used, such as petroleum, chemical, mining, electricity and other fields. This article will describe in detail the process and steps of custom sealing with pressure.

First of all, it is very important to carry out the preliminary preparation work of customized pressure plug. This includes careful inspection and evaluation of the work area to ensure the stability of the working environment. At the same time, it is necessary to understand the structure and characteristics of the pipeline or equipment in order to choose the appropriate plugging scheme and tools.

Secondly, according to the specific plugging needs, choose the appropriate plugging materials and tools. The sealing material can be rubber plug, soft iron plug, expansion plug, etc. According to the size and pressure of the pipeline or equipment, select the appropriate sealing material, and ensure the quality and reliability of the material.

During the implementation of the plugging process, it is necessary to strictly comply with the relevant stability specifications and operating procedures. First, the plugging material is placed on the plugging tool and then inserted into the pipe or equipment. During the insertion process, you need to ensure that the sealing material is positioned correctly and is tightly fitted to the inner wall of the pipe or equipment.

After insertion, use common tools to secure the sealing material. This can be done by adjusting the position of the tool or using a special clamp. Once the sealing material is firmly in place, pressure can be applied to seal.

Before applying pressure, make sure all connections are properly sealed. This includes the inlet and outlet of the pipe or equipment, as well as the contact between the sealing material and the pipe wall. The use of sealant or sealing gasket and other materials can effectively improve the sealing performance.

When applying pressure, it is necessary to select the appropriate pressure method and tool according to the pressure of the pipeline or equipment. Common pressure methods include manual pumps, pneumatic pumps, hydraulic pumps and so on. In the process of applying pressure, it is necessary to closely observe the pressure change and adjust it in time to ensure the effect of blocking.

Once plugging is complete, the plugging effect needs to be checked and evaluated. This can be done through pressure testing, leak detection, etc. If it is found that there are leakage points or the sealing effect is not ideal, it is necessary to take corresponding repair measures in time until the expected sealing effect is achieved.

Finally, the job after the custom pressure plug is to clean up and restore the site. Cleanup involves cleaning and categorizing used tools and materials for next use. Recovery site work involves restoring equipment and pipes around the plug point to normal operating conditions and recording and reporting accordingly.

In general, custom pressure plugging is a complex process that requires strict compliance with the relevant stability specifications and operating procedures during implementation. Only on the basis of adequate preparation and reasonable construction can the stability and reliability of sealing be ensured. The customized pressure plug can effectively protect the operation of the system, improve work efficiency, and reduce potential dangers and risks.

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com