The maintenance technology with pressure plugging is an important and advanced technology, which is mainly used in the maintenance and plugging of pipelines, containers and equipment. This technology can effectively prevent fluid or gas leakage and ensure the stability of the environment. The following details the principles, steps and precautions of the maintenance technology with pressure sealing.

First, principle:

The maintenance technology with pressure sealing is to set the sealing device in the maintenance area of the pipeline or container, so that it can withstand the working pressure, so as to achieve the stable maintenance operation. The plugging device is usually composed of sealing materials, plugging tools and fixtures, which can effectively plug the leak point and prevent the leakage of fluid or gas.

2. Steps:

1. Preparation: Before performing pressure plugging maintenance, you first need to prepare. This includes determining the service area, selecting the appropriate plugging device and tool, and preparing the necessary stabilization equipment and protective measures.

2. Installation of the plugging device: Select the appropriate plugging device according to the actual situation, and install it according to the operating procedures. Typically, the plugging device needs to be installed on both sides of the service area to ensure that it can withstand the working pressure.

3. Sealing of the plugging device: After installing the plugging device, seal it. Select the appropriate sealing material according to the specific situation, and seal according to the operating procedures. Sealing materials are usually rubber gaskets, fillers, etc., which can effectively prevent fluid or gas leakage.

4. Pressure detection: After completing the sealing operation, it is necessary to conduct pressure detection to ensure that the plugging device can withstand the working pressure. By using tools such as pressure gauges, check whether the pressure in the service area meets the requirements to ensure the integrity of the operation.

5. Maintenance operation: After the sealing device is installed and sealed, maintenance operation can be carried out. Select appropriate maintenance methods and tools according to the specific situation, and carry out maintenance operations. In the maintenance process, it is necessary to pay attention to the operating procedures and stability matters to ensure the smooth operation.

6. Removal of the plugging device: After the maintenance operation is completed, the plugging device needs to be removed. Carry out the demolition work according to the operating procedures, and carry out the necessary cleaning and inspection to ensure the normal operation of the equipment and pipes.

Iii. Precautions:

1. Before performing pressure sealing maintenance, the maintenance area must be comprehensively inspected and evaluated to ensure the stability and feasibility of the operation.

2. When installing and removing the plugging device, strictly follow the operating procedures and pay attention to the stability of yourself and others.

3. In the selection and installation process of the plugging device, the appropriate device and material should be selected according to the actual situation to ensure that it can withstand the working pressure.

4. When performing maintenance operations, pay attention to operating procedures and stability matters to avoid accidents.

5. After the completion of maintenance operations, necessary cleaning and inspection should be carried out to ensure the normal operation of equipment and pipelines.

Maintenance technology with pressure closure is a technology that requires advanced knowledge and experience and needs to be carried out under the right conditions. In practical applications, it is necessary to operate according to the specific situation, and combined with relevant regulations and standards to ensure the stability and effectiveness of the operation.

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com