Pipe pressure opener is a common tool used to perform pressure opening work on pipes. It allows the pipeline to operate without downtime, thus improving productivity and stability. Below, I will show you a method of making a pipe tape pressure opener.

1. Preparation of design drawings and materials

First of all, you will need a detailed design drawing to determine the structure and dimensions of the manufactured perforator with pressure. After determining the design drawings, you need to purchase the appropriate materials, which include steel plates, steel pipes, bolts, nuts, welding rods, wires and electrodes.

2. Cut and punch holes

According to the size requirements of the design drawings, the steel plate is cut to the required size and shape. Next, the brackets and handles are made from steel pipes, which are then welded to the steel plates. Using tools such as pliers and files, punch holes and securely attach the brackets and handles to the steel plate.

3. Make valves

To stop the leakage of liquid or gas in the pipe, you need to install a valve. Using tools such as drills and pliers, drill holes and secure valves. The valve is then secured with nuts and bolts to ensure that it is securely attached to the steel plate. The valve is then connected to the pipe using a welding tool to ensure the tightness of the connection.

4. Make an electromagnet

In order to control the opening and closing of the valve with a pressure opening, you need to make an electromagnet. Wrap the wire around the iron core and then secure the core to the switch. Drill holes in the flanges and attach the flanges to the steel plates using welding tools.

5. Install electromagnets and wires

Install the electromagnet to the fixed position of the valve and connect the wire to the top of the electromagnet. The wire is then connected to the electromagnet and the wire is run from the switch through the pipe again. The wire is secured with stabilizing cable clamps and materials such as percussion sand and spray paint are applied to the finished press opener to protect its surface and improve its corrosion resistance.

Step 6 Test

Before using a pressure opener, it must be tested to ensure that it is functioning properly. First, connect the pressure opener to the pipe, and then connect the wire to the power supply. Turn on the power supply and observe whether the valve opens and closes with the action of an electromagnet. If all is well, immediately perform a pressure opening operation on the pipe to test the effect of the pressure opener.

The above is a method for making a pipe with a pressure opener. Making a perforator with pressure requires fine craftsmanship and an in-depth understanding of materials and appliances. If you are not familiar with any of these aspects, be sure to consult a technician for advice and advice to ensure the stability and reliability of the perforator produced.

Get more knowledge about What to Look for When Choosing an hot tapping machine Manufacturer please refer to aoguang sandwich valve：https://www.pipelinehottapping.com